EU Declaration of Conformity

This Declaration of Conformity and the CE-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Declaration of Conformity is issued under the sole responsibility of the manufacturer.

When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating company, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix the CE-marking.

The manufacturer is determined by the serial number:

Serial number starts with DEM1…	Serial number starts with CHM1…	Serial number starts with USM1…
Busch Produktions GmbH Schauinslandstr. 1 79689 Maulburg Germany	Ateliers Busch S.A. Zone industrielle 2906 Chevenez Switzerland	Busch Manufacturing LLC 516 Viking Drive Virginia Beach, VA 23452 USA

declares that the machine: R5 RD 0200 A; R5 RD 0240 A; R5 RD 0300 A; R5 RD 0360 A

fulfill(s) all the relevant provisions from EU directives:

‘Machinery’ 2006/42/EC

‘Electromagnetic Compatibility’ (EMC) 2014/30/EU

‘RoHS’ 2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment (incl. all related applicable amendments)

and comply(-ies) with the following harmonized standards that have been used to fulfill those provisions:

Standards	Title of the Standard
EN ISO 12100 : 2010	Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019	Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower limbs
EN 1012-2 : 1996 + A1 : 2009	Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008	Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019	Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019	Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environments


Legal person authorized to compile the technical file and authorized representative in the EU (if the manufacturer is not located in the EU):	Busch Dienste GmbH Schauinslandstr. 1 DE-79689 Maulburg

Maulburg, 1.03.2023	Chevenez, 1.03.2023	Virginia Beach, 1.03.2023

Dr. Martin Gutmann General Manager Busch Produktions GmbH	Christian Hoffmann General Manager Ateliers Busch S.A.	Martin Breitfuss General Manager Busch Manufacturing LLC