Fitting the Coupling
NOTE
Radial screw.
For trouble-free operation, use thread locking glue to secure the radial screw.
Description | |||
|---|---|---|---|
1 | Coupling hub (machine side) | 2 | Coupling sleeve |
3 | Coupling hub (motor side) | 4 | Radial screw / max. admissible torque: 10Nm |
Machine type | Coupling size | Value “E” (mm) | Value “L” (mm) |
|---|---|---|---|
RD 0200 A | BoWex® M-48 | 4 | 104 |
RD 0240 A | |||
RD 0300 A | |||
RD 0360 A |
In case of a machine delivery without motor:
- Fit the second coupling hub on the motor shaft (separately delivered).
- Axially adjust the sleeve in such a way until value "E" (or “L”) is reached.
- When the coupling adjustment is done, lock the coupling hub by tightening the radial screw.
- Mount the motor on the machine by including the coupling sleeve.
For further coupling information, go to www.ktr.com and download the instruction manual of the BoWex® coupling.