Conveying Condensable Vapors
CAUTION
During operation the surface of the suction and exhaust connections may reach temperatures above 70°C.
Risk of burns!
- Avoid contact with these surfaces during and directly after operation.
CAUTION
Draining the condensate while operating and/or venting the machine, the discharged gases and/or liquids may reach temperatures above 70°C.
Risk of burns!
- Avoid direct contact with the gas and/or liquid stream.
CAUTION
Noise of running machine.
Risk of damage to hearing!
- If people are present in the vicinity of a machine that is not insulated from noise for extended periods of time:
- Make sure to wear hearing protection.
The Aqua version is a design option for conveying condensable vapors (water).
Water vapor within the gas flow is tolerated within certain limits. The conveyance of other vapors shall be agreed upon with Busch.
If condensable vapors are to be conveyed:
Before process:
- Warm up the machine for approximately half an hour.
After process:
- Operate the machine for approximately another half an hour.
- Regularly drain condensate from the silencer with the drain cock.