Cooling Water Connection

Description

CWI

Cooling water inlet

CWO

Cooling water outlet

  1. Connect the cooling water connections (CWI / CWO) to the water supply.

Connection size:

  1. Make sure that the cooling water complies with the following requirements:

Supply capacity

l/min

8 ... 16

Water pressure

bar (g)

1 ... 6

Supply temperature

°C

+10 ... +30

Required pressure differential across supply and return

bar (g)

≥ 1

Cooling water supply temperature in Fahrenheit degrees:

  1. +50 … +86 °F
  2. To reduce the maintenance effort and ensure a long product lifetime, we recommend the following cooling water quality:

Hardness

mg/l (ppm)

< 90

Properties

Clean & clear

PH value

7 ... 8

Particle size

µm

< 200

Chloride

mg/l

< 100

Electrical conductivity

µS/cm

≤ 100

Free chloride

mg/l

< 0.3

Materials in contact with the cooling water

Stainless steel and cast iron

NOTE

Water hardness unit conversion.

1 mg/l (ppm) = 0.056 °dh (german degree) = 0.07 °e (english degree) = 0.1 °fH (french degree)