Suction Connection
WARNING
Unprotected suction connection.
Risk of severe injury!
- Do not put hand or fingers in the suction connection.
NOTICE
Ingress of foreign objects or liquids.
Risk of damage to the machine!
- If the inlet gas contains dust or other foreign solid particles:
- Install a suitable filter (5 micron or less) upstream from the machine.
Connection size(s):
- G3
- ISO DN100, DIN 28404
If the machine is used as part of a vacuum system:
- Busch recommends the installation of an isolation valve in order to prevent the machine from turning backwards.
- Make sure that the connection lines cause no stress on the connections of the machine. Therefore, we recommend installing flexible joints on the suction and discharge connections.